AwardedServicesEuropeanSME-friendlyOpen

Measuring Installation and Dashboard Continuous Measurement

Provincie Noord-Brabant · Open · 2 lots · 326957

0 of 6 core insights found

Measures presence, not accuracy · documents remain authoritative

ScopeAdvicePoints of attentionSuitability requirementsAward criteriaTimeline

Type

Services

90731400

Estimated value

Not published

To deadline

Ongoing

Knock-outs

n/a

exclusion grounds

Award basis

Best price-quality ratio

Assess manuallyconfidence low

The Provincie Noord-Brabant is seeking a service provider for a pilot of continuous measurement in 20 to 35 livestock stables. The contractor must prepare, install, maintain, and remove measuring installations, perform measurements, and calculate emissions. Results will be displayed in dashboards and a final report will be prepared. Reference measurements (validation/calibration) are mandatory. The duration is 18 months, including one year of continuous measurement. The tender is open and focused on services, without a CPV code. The contracting authority expects an integrated solution that combines technical, data-analytical, and reporting aspects.

Services · Open · European procedure · SME-friendly

SME-friendlyEuropean

Contracting authority

Provincie Noord-Brabant

Contract type

Services

Open

Estimated value

Estimate not published

Submission deadline

Ongoing

10:00

Scope

European

European procedure

Lots

2 lots

Main CPV code

90731400

Location

Netherlands

CharacteristicsCPV 90ServicesSME-friendlyEU tendercontinuous measurementemissionslivestock farming

01What is being requested

The Provincie Noord-Brabant is seeking a service provider for a pilot of continuous measurement in 20 to 35 livestock stables. The contractor must prepare, install, maintain, and remove measuring installations, perform measurements, and calculate emissions. Results will be displayed in dashboards and a final report will be prepared. Reference measurements (validation/calibration) are mandatory. The duration is 18 months, including one year of continuous measurement. The tender is open and focused on services, without a CPV code. The contracting authority expects an integrated solution that combines technical, data-analytical, and reporting aspects.

The services include the following: preparing, installing, and performing measurements; calculating emissions; displaying these measurement results in dashboards; and the management and maintenance of measuring installations for the continuous measurement of stables in livestock farming for one year. To complete the measurements, the contractor shall remove the measuring installation and prepare a final report (according to the measurement protocol) in which the experiences and findings of the measurement period are recorded. Additionally, reference measurements are performed (validation/calib

90731400Services

1Lot 1: Measuring naturally ventilated stables—

2Lot 2: Measuring mechanically ventilated stables—

02Breakdown by lot

Lot 1: Measuring naturally ventilated stablesn/a

Lot 2: Measuring mechanically ventilated stablesn/a

Per-lot values not published — bars show only the lot breakdown.

03Exclusion grounds

Exclusion grounds — consult the ESPD

No specific exclusion grounds were extracted. In a European tender, the mandatory and discretionary grounds of art. 2.86/2.87 of the Dutch Procurement Act almost always apply — check the European Single Procurement Document (ESPD).

04Value in context

Estimate not published

The contracting authority did not publish an estimated value — common for a large share of contracts. The EU threshold for diensten is € 221.000, for reference.

05Bidders in this segment

#Likely bidderFitWins

1REMONDIS Smart Infra B.V.SME8429×

2Tauw bvSME7811×

3Kanters B.V.SME7214×

4Stantec B.V.SME687×

5Antea Nederland BVSME687×

6Haskoning Nederland B.V.SME666×

06Legal themes that may be relevant here

Advies 440> Meervoudig onderhandse aanbestedingsprocedure voor een (concessie)opdracht voor diensten voor het beschikbaar stellen, plaatsen,Advies 86> Europese openbare aanbesteding voor levering en onderhoud. Voldoet de motivering van de gunningsbeslissing aan het vereiste dat Advies 611> Een Europese openbare aanbestedingsprocedure voor de renovatie van een rioolwaterzuiveringsinstallatie is beëindigd en aanbested Advies 689> Aanbesteder heeft vrijwillig bekendgemaakt dat hij een opdracht heeft gegund voor de inkoop van een softwareplatform voor gemeenComplaint upheld Advies 598> De klacht ziet op een Europese openbare procedure voor een raamovereenkomst met één ondernemer voor diensten voor het op landeliComplaint dismissed

07Frequently asked questions

What is the scope of the continuous measurement pilot?

The pilot will be carried out in a minimum of 20 and a maximum of 35 livestock stables.

What exactly does the requested service entail?

The assignment includes the preparation, installation, management, and maintenance of measuring installations, performing measurements, calculating emissions, displaying results in dashboards, and preparing a final report.

Which specific measurements are required during the assignment?

In addition to the continuous measurements, reference measurements must be performed for validation and calibration.

What is the total duration of the assignment?

The total duration of the assignment is 18 months, of which one year consists of continuous measurement.

Automatically compiled from the official tender data and documents.

08Estimated value versus the market

p25
€ 214K

median
€ 466K

p75
€ 1,2 mln

deze opdracht

Gegunde waarden in CPV 90 · diensten n=2216