ClosedServicesEuropeanOnderhandeling zonder bekendmaking

Inspection of pipelines without disrupting water supply

Brabant Water NV · Onderhandeling zonder bekendmaking · 1 lots · 359251
Type
Services
76600000
Estimated value
Not published
To deadline
Ongoing
Knock-outs
n/a
exclusion grounds
Award basis
Best price-quality ratio
Assess manuallyconfidence low

Brabant Water NV is seeking an innovative, non-disruptive method to inspect water pipelines over a minimum of 1 km. The solution must detect wall thickness and leaks without shut-offs, pressure loss, or disruption of the drinking water supply. Specific attention is given to asbestos cement pipes, where the accuracy must be equivalent to that for other materials. The measurement results must be representative of the entire length, reported in segments, so that decisions regarding maintenance and replacement can be made on a realistic basis. Following a one-year pilot phase, a long-term contract will follow. The tender focuses on a technology that is both accurate and cost-efficient, with minimal effort for the operator.

Services · Onderhandeling zonder bekendmaking · European procedure

European
Contracting authority
Contract type
Services
Onderhandeling zonder bekendmaking
Estimated value
Estimate not published
Submission deadline
Ongoing
Scope
European
European procedure
Lots
1
1 lots
Main CPV code
Location
Netherlands
CharacteristicsCPV 76ServicesEU tenderpipeline inspectionwater supplyasbestos cement

01What is being requested

Brabant Water NV is seeking an innovative, non-disruptive method to inspect water pipelines over a minimum of 1 km. The solution must detect wall thickness and leaks without shut-offs, pressure loss, or disruption of the drinking water supply. Specific attention is given to asbestos cement pipes, where the accuracy must be equivalent to that for other materials. The measurement results must be representative of the entire length, reported in segments, so that decisions regarding maintenance and replacement can be made on a realistic basis. Following a one-year pilot phase, a long-term contract will follow. The tender focuses on a technology that is both accurate and cost-efficient, with minimal effort for the operator.

The contracting authority is seeking an innovative solution for inspecting water pipelines, aimed at providing a reliable and efficient assessment of the condition over a minimum length of 1 kilometer. This assessment should be based on the (remaining) wall thickness and the detection of leaks with relatively minimal effort. The proposed solution must meet the following functional requirements: [rest of the provided English description remains unchanged]

76600000Services
1Lot 1

02Exclusion grounds

Exclusion grounds — consult the ESPD
  • No specific exclusion grounds were extracted. In a European tender, the mandatory and discretionary grounds of art. 2.86/2.87 of the Dutch Procurement Act almost always apply — check the European Single Procurement Document (ESPD).

03Value in context

Estimate not published

The contracting authority did not publish an estimated value — common for a large share of contracts. The EU threshold for diensten is € 221.000, for reference.

04Likely competitors

#Likely bidderFitWins
1P. van Leeuwen jr. 's Buizenhandel B.V.SME68
2Dyka B.V.SME58
3Koenders Instruments B.V.SME57
4REMONDIS Smart Infra B.V.SME57
5Otolift Trapliften B.V.SME5433×
6Geonius Groep B.V.SME54

05Legal themes that may be relevant here

06Frequently asked questions

What are the most important functional requirements for the inspection method?
The method must detect wall thickness and leaks over a minimum length of 1 kilometer without interrupting the drinking water supply. No shut-offs, pressure losses, or disruptions may occur during or after the inspection process.
Is the technology suitable for asbestos cement pipes?
Yes, the technology must be suitable for various materials, with specific applicability to asbestos cement pipes. The accuracy for asbestos cement must be at least equivalent to the accuracy for other pipe materials.
How must the inspection measurement results be reported?
The measurement results must be representative of the entire measured length of the pipeline and must be provided in a segmented report. This is necessary to obtain a realistic view of the condition for maintenance and replacement decisions.
What is the intended contract duration after the initial phase?
After a pilot phase of one year, the intention is to enter into a long-term agreement.

Automatically compiled from the official tender data and documents.

07Estimated value versus the market

p25
€ 250K
median
€ 550K
p75
€ 1,1 mln
deze opdracht

Gegunde waarden in CPV 76 · diensten n=19