AwardedSuppliesEuropeanSME-friendlyOpen

5 Waste collection vehicles with various configurations

Gemeente Terneuzen · Open · 4 lots · 377988
Type
Supplies
34144510
Estimated value
Not published
To deadline
Ongoing
Knock-outs
0
exclusion grounds
Award basis
Best price-quality ratio
Assess manuallyconfidence moderate

The Municipality of Terneuzen wishes to procure the supply of various waste collection vehicles, specifically rear loaders with washing installation and crane-hopper vehicles with compaction system.

Supplies · Open · European procedure · SME-friendly

SME-friendlyEuropean
Contracting authority
Contract type
Supplies
Open
Estimated value
Estimate not published
Submission deadline
Ongoing
12:00
Scope
European
European procedure
Lots
4
4 lots
Main CPV code
Location
Netherlands
CharacteristicsCPV 34SuppliesSME-friendlyEU tender

01What is being requested

Supply of waste collection vehicles with various configurations, including rear loader collection vehicles with washing installation and crane-hopper vehicles with compaction system.

The Municipality of Terneuzen has decided to proceed with the procurement of five waste vehicles. Because these are vehicles with different body types, it has been decided to divide the contract into four lots:1. 2 units drum vehicle (1 equipped with washing installation)2. 1 crane-hopper vehicle equipped with compaction system3. 1 drum vehicle rear loader bulky waste including hook lift4. 1 hook lift vehicle

34144510Supplies
12 units drum vehicle (1 equipped with washing installation)
21 crane-hopper vehicle equipped with compaction system
31 drum vehicle rear loader bulky waste including hook lift
41 hook lift vehicle

02Outcome

Awarded

BekkerLaGram Waalwijk B.V.

Bidders
1

03Breakdown by lot

2 units drum vehicle (1 equipped with washing installation)n/a
1 crane-hopper vehicle equipped with compaction systemn/a
1 drum vehicle rear loader bulky waste including hook liftn/a
1 hook lift vehiclen/a

Per-lot values not published — bars show only the lot breakdown.

04Strategic insight

Strategic insight · AI analysis
Ensure a service point is available that is reachable within the specified time. Check whether the hydraulic installation meets the requirements for simultaneous operation. Pay attention to the specific warranty conditions for the chassis, crane, and bodywork.
Read automatically from the tender documents using AI. Always verify against the original documents.

05Points of attention

Important · 5
The contractor must handle the registration and RDW inspection of the vehicles.Important
The costs for RDW inspection are for the contractor.Important
The main contractor is responsible for replacing all oils and filters at their own expense after the break-in period on location.Important
The vehicle must be painted in color RAL 2000.Important
The warranty on the complete vehicle is the responsibility of the contractor.Important

06Can I take part?

Technical — The bidding party has a service point (regarding the chassis) that can be reached from the contracting authority's base of operations within 25 min.
Technical — At this service point, at least 90% of all occurring repairs and maintenance work on the chassis must be able to be performed.

07Exclusion grounds

Exclusion grounds — consult the ESPD
  • No specific exclusion grounds were extracted. In a European tender, the mandatory and discretionary grounds of art. 2.86/2.87 of the Dutch Procurement Act almost always apply — check the European Single Procurement Document (ESPD).

08Value in context

Estimate not published

The contracting authority did not publish an estimated value — common for a large share of contracts. The EU threshold for leveringen is € 221.000, for reference.

09Bidders in this segment

#Likely bidderFitWins
1Terberg Matec Nederland B.V.SME10043×
2Scania Nederland B.V.SME10038×
3BekkerLaGram Waalwijk B.V.SME9821×
4Aebi Schmidt Nederland B.V.SME9738×
5Truckland B.V.SME9725×
6Kenbri Fire Fighting B.V.SME9631×

10Tender documents

TN525209 - EF29 Aankondiging gegunde opdracht - algemene richtlijn, standaardregeling 20250819124449pdfAug 20, 2025 · 17 KB
TN525209 - EF16 Aankondiging van een opdracht - algemene richtlijn, standaardregeling 20250613104128pdfJun 13, 2025 · 21 KB
Toelichting vervallen perceel 3docxJun 13, 2025 · 15 KB
Bijlage 5.1 Invulformulier Prijs Perceel 1 NIEUWxlsxJun 13, 2025 · 21 KB
Bijlage 3.4 Programma van Eisen perceel 4 (4) NIEUWdocxJun 3, 2025 · 58 KB
Nota van inlichtingen 2025-06-03-2pdfJun 3, 2025 · 39 KB
TN525209 - EF16 Aankondiging van een opdracht - algemene richtlijn, standaardregeling 20250603112034pdfJun 3, 2025 · 20 KB
Bijlage 5.2 Invulformulier Prijs Perceel 2xlsxMay 10, 2025 · 13 KB
Bijlage 8 Verklaring geen Russische betrokkenheiddocxMay 10, 2025 · 97 KB
Bijlage 5.1 Invulformulier Prijs Perceel 1xlsxMay 10, 2025 · 13 KB
Bijlage 1 VNG Model algemene inkoop voorwaarden voor leveringen en dienstenpdfMay 10, 2025 · 378 KB
Bijlage 5.4 Invulformulier Prijs Perceel 4xlsxMay 10, 2025 · 13 KB

11Legal themes that may be relevant here

12Frequently asked questions

Which specific vehicle types are part of the contract?
The contract includes the supply of five vehicles: two drum vehicles (one of which has a washing installation), one crane-hopper vehicle with compaction system, one drum vehicle rear loader bulky waste including hook lift, and one hook lift vehicle.
Which general purchasing conditions apply to the delivery?
The execution of the agreement takes place under the VNG Model General Purchasing Conditions for supplies and services. These conditions contain provisions regarding, among other things, quality, inspection, warranty, liability, and invoicing.
What are the most important provisions regarding the delivery of the goods?
The delivery is regulated in accordance with the provisions in the VNG Model conditions, whereby specific articles are used for delivery, packaging, transport, and the transfer of ownership and risk.

Automatically compiled from the official tender data and documents.

13Estimated value versus the market

p25
€ 280K
median
€ 606K
p75
€ 1,6 mln
deze opdracht

Gegunde waarden in CPV 34 · leveringen n=1101